Moog Moogerfooger MF 103 12-Stage Phaser Overview
The Moog MF-103 12-Stage Phaser is a high quality effect designed by Bob Moog.The Moog MF-103 contains an amazing-sounding 6 or 12 stage phaser circuit as well as a wide-range LFO with an adjustable sweep amount. Used with guitars, basses, keyboards, samples, or recorded tracks, the MF-103 can apply subtle tonal coloration or extremely deep phasing that spins your speakers and ears out of control.
The MF-103 12-stage phaser is a direct descendant of the original Moog modular synthesizers, yet can be used with any instrument level to line level signal.
Call GAK now for product info, advice and the Best Prices - 01273 665400
- RATE rotary control, which varies LFOs frequency over a 250:1 range.
- AMOUNT rotary control, which adjusts the amount by which the LFO output varies the phaser sweep.
- SWEEP rotary control, which moves the phaser frequency response over a six-octave range.
- RESONANCE rotary control, which adjusts the height and sharpness of the peaks of the phaser frequency response.
- DRIVE rotary control, which adjusts the gain of the audio input to the phaser.
- OUTPUT LEVEL rotary control, which balances the phaser signals with the bypassed signal.
- LO-HI rocker switch, which chooses between the low LFO range (0.01 Hz to 2.5 Hz) and the high LFO range (1.0 Hz to 250 Hz).
- LEVEL, a three-color LED that is used to set the DRIVE control.
- LFO, a LED that indicates the LFO rate.
- BYPASS, a two-color LED that tells whether the phaser is active or bypassed.
- ON/BYPASS, a rugged, smooth-acting stomp switch.
- AUDIO IN 1/4" phone jack - accepts any instrument-level or line-level audio signal from -16 dBm to 4 dbm. Input impedance is one megohm.
- AUDIO OUT 1/4" phone jack - -4 dBm nominal output level. 8 dBm absolute maximum output level. Output impedance is 5,000 ohms.
- AUX OUT 1/4" phone jack - -4 dBm nominal output level. 8 dBm absolute maximum output level. Output impedance is 5,000 ohms.
- RATE, AMOUNT, SWEEP, RESONANCE, all of which are stereo 1/4" jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from two-circuit or three-circuit 1/4" jacks.
- SWEEP IN - provides a means of applying an external /- 2.5 volt control signal to the second 6-section phasing circuit, in place of the LFO. Input impedance is 50,000 ohms.
- LFO OUT 1/4" phone jack - delivers the LFO waveform (triangular wave; /- 2.8 volts) for use by other voltage-controlled devices. Output imedance is 600 ohms.
- 9V POWER INPUT jack
- CASE: Black panel with hardwood sides -- classic analog appearance.
- DIMENSIONS: 9" x 6" x 2-1/2"
- NET WEIGHT: 2 lb.
