Moog Werkstatt 01 Kit Synthesiser Overview
Moog Werkstatt 01 Kit Synth Overview By GAK.
Originally released as a special for workshop attendees of a VIP workshop at MOOGFEST 2014, demand for this diminutive synth was such that MOOG brought Werkstatt into production for everyone. A single oscillator semi modular synth with a fully analogue signal path and not much bigger than a VHS cassette this little baby has sonic potential that makes Werkstatt a serious contender for the beginner and the Pro alike. Featuring a miniature 20 point CV patch bay (expandable to jack connectors with the MOOG Werkstatt CV expander), Moog's classic four pole ladder filter with resonance, Werkstatt gives the project musician access to that hallowed MOOG signature sound! Expandable, moddable, transportable, essential!
Call GAK now for further info. 01273665413
- The Werkstatt-Ø1: Moogfest 2014 Kit is a patchable and compact, one oscillator analog synthesizer. It was originally created as a kit, to be the foundation for exclusive "Engineering VIP" workshops at Moogfest 2014. Due to a number of requests, Moog is offering a no-soldering-required version of the Werkstatt-Ø1: Moogfest 2014 Kit in limited quantities, at select US dealers only. Assembly is extremely simple: Any user can quickly build an analog synthesizer based on classic Moog circuits, and if desired, study the analog circuits. Werkstatt was created to be an educational tool, but it is also a formidable, compact analog synthesizer from Moog.
- OSCILLATOR SECTION:
- -Single VCO w/ frequency control (8Hz to 16KHz)
- -Saw and square waveshapes w/ control for square pulse width
- -Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control
- -Ability to PWM the square wave
- FILTER SECTION:
- -Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)
- -Select between the Envelope generator and LFO as Mod Source.
- -Polarity switch ( /-) and amount knob for control of filter cutoff modulation
- LFO SECTION:
- -Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)
- VCA/AMP SECTION
- -Select between the Envelope Generator or ON (Drone)
- ENVELOPES SECTION
- -Controls for Attack & Decay time w/ Sustain On/Off switch
- KB SECTION
- -One octave low-note priority legato keyboard w/ glide control
- PATCHBAY:
- -VCA Input0V to 5V in VCA EG Mode, /-2.5V in VCA ON Mode
- -VCF Input-5V to 5
- -VCO LINEAR FM Input /-2.5V - NOTE: this is an inverting control input
- -VCO EXPONENTIAL FM Input -5V to 5V, 1V/Octave trimmable
- -LFO CV Input 5V to 5V - NOTE: Negative CV slows LFO more than the panel
- -VCF AUDIO InputUnbuffered/Unmixed AC coupled input to VCF
- -2x KB CV Output3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave
- -2x TRIG Output 5 msec pulse, 0 to 5 V signal generated from low-note priority
- -2x GATE Output0 to 5V signal generated from low-note priority
- -2x EG Output0 to 5V signal, Simple ASD or AD type Envelope Generator
- -2x LFO Output -2.5 to 2.5V Triangle or Square wave, selected via LFO Switch
- -2x VCF Output-2V to 2 V signal for audio or CV uses
- -2x VCO Output0V to 5V VCO signal, wave selected by VCO Wave Switch
- Rear Panel:
- -AUDIO Output Nominal /-1.5V Signal
- -POWER 12VDC Center Positive w/ 1.2A Wall transformer
- -POWER CONSUMPTION 1.8 Watt AVG
