Rode NT 6 Overview
Includes FREE RPS-1000 PopShieldThe new Rode NT6 is a small-diaphragm condenser microphone that's specifically designed for difficult mounting applications or discreet placement. The compact capsule of the NT6 is connected to the main part of the mic by a 3-meter Kevlar-reinforced cable. The NT6 runs on standard 48-volt phantom power. The mic has a fixed cardioid pattern, a frequency range of 40Hz-20kHz and a maximum SPL figure of 135dB.
The NT6 is extremely well suited to any situation where a small unobtrusive but powerful microphone system is required. It features a unique compact capsule connected to the main body of the mic by a three-meter cable, making it perfect for discrete instrument miking, especially in tight spaces.
The NT6's mic body, which houses the preamp and XLR connector, also features -10dB pad and 80Hz high-pass filter switches, so you can adjust these settings without disturbing the position of the capsule. The NT6 is supplied with all the necessary mounting hardware, a windshield and a zip-up pouch.
Call GAK now for product info, advice and the Best Prices - 01273 665400
- 1/2 (externally biased) gold spluttered true condenser capsule
- Heavy duty satin-nickel-plated body
- 2-position variable pad: 0 dB and -10 dB
- 2-position variable high-pass filter: flat and 80 Hz
- Surface mount technology
- Low noise
- Wide dynamic range
- Full frequency response
- Supplied complete with 2-axis swivel mount, M5 clip, WS5 (Black) Wind Shield and Soft Pouch
- Designed & manufactured in Australia
- Acoustic Principle: Externally polarised 1/2 (13mm) pressure gradient condenser
- Directional Pattern: Cardioid
- Frequency range: 40 Hz ~ 20,000 Hz selectable HPF @ 80 Hz/12 dB/octave
- Output Impedance: 200 O
- Signal/Noise ratio DIN/IEC 651: 75 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
- Equivalent Noise: 19 dB SPL (per IEC651, IEC268-15)
- Maximum SPL: 138 dB (@ 1% THD into 1 kO) 148 dB (@ 1% THD into 1 kO) - pad at maximum
- Sensitivity at 1 kHz into 1 kO: -38 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) /- 2 dB
- Maximum output voltage: 6 dBu (@ 1% THD into 1 kO)
- Dynamic Range - DIN/IEC 651: 119 dB (per IEC651, IEC268-15)
- Power (Supply voltage): 48 Volts (P48)
- Output Connection: 3 pin XLR, balanced output between pin 2( ), pin (-) & pin 1 (ground)
- Weight: 386 grm. (12.41 oz.)
- Dimensions: Diameter = 20 mm Length = 118.4 mm
- Main Body Asssembly: Diameter = 20 mm
- Length = 88.5 mm (Capsule face to cable connector) Height = 64 mm (Capsule to mount)