Sennheiser E600 DRUMKIT Overview
The Sennheiser e 600 7-Piece Drum Microphone Kit contains all the essential pieces you will need to mic up a full drum kit professionally. The e 600 is perfect for live and studio applications and features an e602-II kick drum mic, 2 e614 condenser mics, 4 e604 tom/snare mics and a strong aluminium carry case for easy storage and safe transport.Call GAK now for product info, advice and the Best Prices - 01273 665400
- Rugged reinforced fibreglass body
- Low sensitivity to impact and handling noise
- Very high sound pressure handling capability
- Low distortion microphone
- Hum compensating coil
- Easy to position due to compact design
- Integral stand mount
- Rugged design
- Effective rejection of incidental rear noise
- Excellent directivity across the whole frequency range Full, natural sound High maximum sound pressure level
- Wide frequency response
- Frequency response 40 Hz - 20 kHz
- Transducer principle permanently polarized condenser
- Pick-up pattern supercardioid
- Sensitivity in free field, no load (1kHz) 3 mV/Pa = - 50dB (0 dB = 1 V/Pa)
- Nominal impedance 50 Ohm
- Min. terminating impedance 1 kOhm
- Dimensions W = 20mm, L = 100mm
- Maximum sound pressure level (passiv) 139 dB/SPL
- Rugged, lightweight aluminium body for stable positioning on long microphone boom arms
- Lightweight high-performance voice coil construction
- Fast transient response
- Low frequency extension
- Ideal for direct use on the most problematic bass signal
- Frequency-independent directivity provides isolation from other on-stage signals
- Humbucking coil
- Integral stand mount