Shure 596LB Overview
The Shure Model 596LB is a compact, hand-held dynamic, low-impedance communications microphone with a 200 to 5,000 Hz frequency response. Designed especially for voice communications use, it is an economical unit for applications in budget-restricted paging and other installations. The 596LB microphone is compatible with many popular paging amplifier inputs. Its tailored frequency response provides clear, intelligible operation. The ARMO-DUR® case is small, light and sturdy, and fits comfortably in the palm of the hand. It has a long-life push-to-talk switch, and a durable coiled cable for years of reliable performance. The 596LB has a low-impedance output.The 596LB can be wired for balanced-line operation and is recommended for use where long cable lengths are required, or conditions where severe hum pickup may exist. The 596LB can be fed directly into a standard low-impedance amplifier input, or a Shure A95 Series Line Matching Transformer (at the equipment end of the cable) can be used for coupling the 596LB to the input of a high-impedance amplifier. A two-conductor shielded cable can be used for extending only the microphone circuit. If both the microphone and the remote circuit are to be extended, a four-conductor with two shielded conductors should be used. The microphone circuit of the 596LB is normally open when the microphone switch button is not depressed
Call GAK now for product info, advice and the Best Prices - 01273 665400
- Omnidirectional pickup pattern for optimum off-axis operation
- Frequency response from 200 to 5,000 Hz, tailored for voice communications
- Economical-the perfect choice for modest paging installations
- Rugged and dependable under most operating conditions
- Silver-plated switch contacts for long-term low contact resistance and reliable performance
- Long-life vinyl-jacketed coil-cord for years of trouble-free operation
- Output impedance matches most paging amplifier inputs
- Virtually indestructible ARMO-DUR case
- Sturdy, convenient mounting button for attaching to equipment
- or nearby surface using supplied mounting bracket
- Attatched cable 1.5 m (5 ft) extended length, 4-conductor (2 shielded), vinyl-jacketed coil-cord i.e. no connector.