Shure BLX14UK/B98 Overview
Shure Beta Wireless Instrument System with Beta 98H/C Clip-on Gooseneck Microphone (Analogue) Clip-on condenser microphone with analogue transmission. The Beta 98H/C condenser microphone is a versatile solution for brass or percussion instruments. It offers a flexible integrated gooseneck with clip-on clamp for a secure fit and precise positioning. It combines simple setup and an intuitive interface for performance you can trust in.Call GAK now for product info, advice and the Best Prices - 01273 665400
- What is the Beta 98H/C best suited to? - It's a premium instrument microphone with a flexible gooseneck and clip on clamp making it ideal for use with brass, percussion and woodwind instruments, either on stage or in the studio.
- What receiver comes with the Beta Wireless Instrument System? - The Beta Wireless Instrument System comes with the Analog Wireless Receiver BLX4 that provides improved linearity and frequency response.
- The receiver BLX is ready to perform right out of the box and is the clearest choice for performers who wish to unplug from the wire. It's also available as rack mount, metal receiver and Dual Receiver.
- How many musicians can use this system simultaneously? - Up to 12 compatible channels per group with group and channel scan for easy set-up.
- Why internal antennas? - For ideal signal strength, antennas on a wireless system need to be set up in a certain way. The internal antennas on the BLX receiver are already set in this ideal way, offering up to 100 m operating range and optimal signal strength.
- Additionally internal antennas cannot be broken during setup, use or transport.
- Is the setup really that easy? - Yes, with one button you can start the group and channel scan, which gives you the best open frequency. Adjust the transmitter to the same channel and you're ready to go.
- How does the BLX receiver perform compared to wired? - The frequency response of the wireless microphone is almost identical to the frequency response of a wired mic. Also the dynamic performance is almost the same.
- Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
- Available Frequencies: Between 524-865 MHz (available frequencies depend on applicable regulations in country where system used)
- Audio Range: 50-15,000 Hz (dependent on microphone type)
- Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical (ref. /- 38 kHz deviation, 1 kHz tone)
- Operating Temperature Range: -18°C (0°F) - 50°C (122°F)
- Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
- BLX88: 12-18 V DC at 320 mA, supplied by external power supply
- BLX4 Receiver - Output Impedance:
- - XLR connector 200 O
- - 6.35 mm (1/4") connector: 50 O
- Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
- - XLR connector -27 dBV (into 100 kO load)
- - 6.35 mm (1/4") connector -13 dBV (into 100 kO load)
- RF Sensitivity: 105 dBm for 12 dB SINAD, typical
- Image Rejection: >50 dB, typical
- Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
- Weight: 241 g
- Housing: Molded ABS
- Power Requirements: 12-15 V DC @ 160 mA, supplied by external power supply (tip positive)
- BLX1 Bodypack Transmitter - Audio Input Level:
- - gain max: -16 dBV maximum
- - gain min (0 dB): 10 dBV maximum
- Gain Adjustment Range: 26 dB
- Input Impedance: 1 MO
- RF Transmitter Output: 10 mW, typical, varies by region
- Dimensions: 110 mm x 64 mm x 21 mm (H x W x D)
- Weight: 75 g, without batteries
- Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life: up to 14 hours (alkaline)