Shure BLX14UK

Shure BLX14UK Main Overview:

• What receiver comes with the PG Wireless Guitar System? - The PG Wireless Guitar System comes with the Analogue Wireless Receiver BLX4 that provides improved linearity and frequency response. The receiver BLX is ready to perform right out of the box and is the clearest choice for performers who wish to unplug from the wire. It's also available as rack mount, metal receiver and Dual Receiver.
• How many musicians can use this system simultaneously? - Up to 12 compatible channels per group with group and channel scan for easy set-up.
• Why internal antennas? - For ideal signal strength, antennas on a wireless system need to be set up in a certain way. The internal antennas on the BLX receiver are already set in this ideal way, offering up to 100 m operating range and optimal signal strength. Additionally internal antennas cannot be broken during setup, use or transport.
• Is the setup really that easy? - Yes, with one button you can start the group and channel scan, which gives you the best open frequency. Adjust the transmitter to the same channel and you're ready to go.

Shure BLX14UK Specifications:

• Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
• Available Frequencies: Between 524-865 MHz (available frequencies depend on applicable regulations in country where system used)
• Audio Range: 50-15,000 Hz (dependent on microphone type)
• Transmitter RF Output Power: 10 mW, typical (varies by region)
• Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
• Battery Life: Up to 14 hours
• Dynamic Range: 100 dB A-weighted
• System Distortion: 0.5% THD typical (ref. /- 38 kHz deviation, 1 kHz tone)
• Operating Temperature Range: -18°C (0°F) - 50°C (122°F)
• Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
• BLX4: 12-18 V DC at 150 mA, supplied by external power supply

Component Specifications:

• BLX4 Receiver -
• Output Impedance:
• - XLR connector 200 O
• - 6.35 mm (1/4") connector: 50 O
• Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
• - XLR connector -27 dBV (into 100 kO load)
• - 6.35 mm (1/4") connector -13 dBV (into 100 kO load)
• RF Sensitivity: 105 dBm for 12 dB SINAD, typical
• Image Rejection: >50 dB, typical
• Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
• Weight: 241 g
• Housing: Molded ABS
• Power Requirements: 12-15 V DC @ 160 mA, supplied by external power supply (tip positive)
• BLX1 Bodypack Transmitter
• Audio Input Level:
• - gain max: -16 dBV maximum
• - gain min (0 dB): 10 dBV maximum
• Gain Adjustment Range: 26 dB
• Input Impedance: 1 MO
• RF Transmitter Output: 10 mW, typical, varies by region
• Dimensions: 110 mm x 64 mm x 21 mm (H x W x D)
• Weight: 75 g, without batteries
• Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
• Battery Life: up to 14 hours (alkaline)