Shure BLX24UK/PG58 Overview
Shure PG Wireless Vocal System with PG58 (Analogue) Entry Shure vocal microphone combined with simple setup and an intuitive interface for performance you can trustCall GAK now for product info, advice and the Best Prices - 01273 665400
- Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
- Available Frequencies: Between 524-865 MHz (available frequencies depend on applicable regulations in country where system used)
- Audio Range: 50-15,000 Hz (dependent on microphone type)
- Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical (ref. /- 38 kHz deviation, 1 kHz tone)
- Operating Temperature Range: -18°C (0°F) - 50°C (122°F)
- Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
- BLX4: 12-18 V DC at 150 mA, supplied by external power supply
- Entry point to professional Shure quality, ruggedness and sound.
- PG58 Vocal Microphone:
- Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
- Cartridge includes a neodymium magnet for high output level.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- On/off switch for onstage control.
- Hardened steel mesh ball grille that resists wear and abuse.
- Integral "pop" filter reduces explosive breath sounds and wind noise.
- Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.
- BLX2 Handheld Transmitter:
- Power and battery status LED
- Adjustable gain control
- Quick and easy frequency matching
- AA batteries (included) provide up to 14 hours of continuous use
- 100 m (300 ft.) operating range (line of sight)
- Receiver BLX4
- Up to 12 compatible systems (region dependent)
- Microprocessor-controlled internal antenna diversity
- One touch QuickScan locates the best open frequency
- ¼" and XLR audio outputs
- Two color audio status indicator LED
- BLX4 Receiver - Output Impedance:
- - XLR connector 200 O
- - 6.35 mm (1/4") connector: 50 O
- Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
- - XLR connector -27 dBV (into 100 kO load)
- - 6.35 mm (1/4") connector -13 dBV (into 100 kO load)
- RF Sensitivity: 105 dBm for 12 dB SINAD, typical
- Image Rejection: >50 dB, typical
- Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
- Weight: 241 g
- Housing: Molded ABS
- Power Requirements: 12-15 V DC @ 160 mA, supplied by external power supply (tip positive)
- BLX2 Handheld Transmitter - Audio Input Level:
- - gain 0dB: -20 dBV maximum
- - gain -10dB: -10 dBV maximum
- Gain Adjustment Range: 10 dB
- RF Transmitter Output: 10 mW, typical, varies by region
- Dimensions: 224 mm X 53 mm dia.
- Weight: 218 g (without batteries)
- Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life: up to 14 hours (alkaline)
